Control Software

• Model number: AS-203M
• Outer dimension (mm): 292 x 333 x 433
• Chamber internal dimensions: 224 x 200 x 340mm
• Chamber capacity: 16L
• Control temperature range: 15 - 45? (per 0.1?)
• Temperature accuracy: Display system +/- 0.25? (at 37.0?, surrounding 25?)
• Control system: Peltier element
• CO2 concentration control range: 0 - 20% (per 0.1%)
• CO2 display precision: +/- 0.1% (at 5.0%)
• Sensor/dual beam system IR (infrared) sensor
• Alarm function: Temperature, CO2 concentration
• Gas supply pressure: 0.3 - 1.0bar (0.03 - 0.1MPa)
• Access port: f11mm (chamber at the top left side)
• Chamber material: ABS resin
• Number of shelf board: Standard 2 boards (maximum 3 boards, made of stainless steel)
• Shelf board size: 220 x 164mm
• Power supply: 12VDC, 100VAC 50/60Hz 63W
• Weight: 6.8kg
• Ultra compact size that allows installation inside clean bench
• Adopts high performance IR(infrared ray) sensor for CO*@2@* control, which is not affected by temperature/humidity changes.
• Integrates Peltier device cooling function that allows use of wide temperature setting from 15~45?.
• Possible to transported by vehicle with help of accessory 12V power supply cable.

• Model number: DX-038S
• Size (mm): 149 x 104 x 227
• Shooting element: 5.0 Mega-pixel
• Focal length: 10 - 50mm
• Frame rate: 30f/s
• LCD panel size: 3.5 inches
• Resolution: 12M?9M?5M?3M?1.3M?VGA
• Focus adjustment range: 10 - 50mm
• Magnification: Optical system/10 - 300x, Digital system/4x
• Light source: LED 8 pieces (brightness adjustable)
• Power supply: Lithium rechargeable battery (adapter/charging from USB)
• Size: 149 x 104 x 227mm
• Weight: 1.1kg
• Built-in software: MicroCapture (with measurement function)
• Capable of TV output.
• Saves measured data on SDHC card.

• Model number: FCI-280GEC
• Specification: Fixed color (purple)
• Inner chamber dimension (mm): 329 x 219 x 369
• Light specification: LED bar
• Power supply: AC100V 50/60Hz
• External dimensions: 420 x 413 x 485mm
• Temperature settings range: 10 - 45?
• Points: Temperature control (low temperature to high temperature) is available according to the kind and development process of the plant.
• This plant growing device with temperature control function can set optimum light and temperature environment depending on species and growth process of plant to be grown.
• Peltier device controls temperature by heating or cooling, so that control can be performed not only to achieve high or low temperature but to perform fine adjustment around room temperature.
• Programmed color-control type(FCI-280GHS) can independently control color and light quantity of each of red, green, and blue colors to reproduce 140,000 colors, so that optimum light environment can be achieved in accordance with growth stage of plant.
• FCI-280GEC is purple fixed light type that can be widely used and enables culture tests to be performed simply.
• Cultivation tank and planting panel are included.

• Model number: FCI -280 GHS
• Specification: Program color high spec
• inner dimension (mm): 329 x 219 x 369
• Light specification: Color LED bar
• Adjustments: red, green, blue,, and Timer functions (Each CH independent can be set to ON / OFF 5 times / day and light quantity adjustable)
• power supply: AC100V 50 / 60Hz
• external dimension: 420 x 413 x 485 mm
• temperature settings range: 10 to 45 ? C
• [dedicated controller]
• ?* Red, green and blue are 140000 colors!!
• ?* Each color is the timer Operation 5 times a day
• Point: Temperature control (low-temperature to high temperature) is possible for plant Type and the course of training.
• This plant growing device with temperature control function can set optimum light and temperature environment depending on species and growth process of plant to be grown.
• Peltier device controls temperature by heating or cooling, so that control can be performed not only to achieve high or low temperature but to perform fine adjustment around room temperature.
• Programmed color-control type(FCI-280GHS) can independently control color and light quantity of each of red, green, and blue colors to reproduce 140,000 colors, so that optimum light environment can be achieved in accordance with growth stage of plant.
• FCI-280GEC is purple fixed light type that can be widely used and enables culture tests to be performed simply.
• Cultivation tank and planting panel are included.

• Model number: PCM 500
• Number of pixels: 5.0 Mega-pixel
• Imaging element: 1/2. 5
• Interface: USB 3.0 (USB 2.0 is also available, but the original performance is not available)
• Frame Rate: 2592 x 1944 @ 14 fps, 1296 x 972 @ 30 fps, 648 x 486 @ 50 fps (It varies depending on the operating environment.)
• Pixel size: 2.2 ?m x 2.2 ?m
• Supported OS: Windows (R) 7, 8, 10
• Mount: C mount f 23.2 mm f 30.0 mm
• Data format: BMP, JPG, SFC, TIFF, AVI
• Imaging area: 5.7 mm x 4.28 mm
• main unit size: 81 x 129 x 48 mm
• Weight: 250 g
• Accessories: CS Ring Adapter, USB Cable (Removable), Calibration Calibration Slide, Software (Japanese)
• Transfers data quickly via. USB3.0, allowing stress-free operation even for high-resolution images.
• Digital camera for microscope excellent in color reproducibility.
• Provided with Japanese-ready software for better operability. (image processing, image measuring)
• Easy device installation by Plug and Play.

• Model Number: AS 3000
• Specification: Light source section
• Size (mm): 72 x 186 x 104
• Average Illuminance: 143000 lx, AS 3000 500 + PFS 6H 63000 IR 1 * 2 / about 3000 lx, AS 500 + PFS 6H 33000 IR 2 * 2 / about 3000 lx, AS 500 + PFS 6H 63000 F2 * 2 / about 3000 lx, AS 500 + PFS 6H 33000 F2
• Color temperature: 5600 K
• LED life: about 30,000 hours
• Specifications: Light guide / binding diameter f6 mm, exterior material / stainless (SUS304)
• Light dimming: Manual, analog signal 0 to 5V, PWM 200 Hz 5V
• Cooling system: Natural heat radiation + silent fan
• Maximum Power Consumption: 15 W
• power supply: AC100V 50 / 60Hz DC24V 1.5 A
• Weight: About 1.8 kg
• * 1: Fiber cohesive diameter f8 mm length 1000 mm is a value in 50 mm from the tip of the light guide using a light guide
• * 2: Value in 100 mm from light guide tip
• Operates by either AC or DC power supply.
• Light control can be performed manually or by analog signal/pulse width modulation.

• Model number: PFS6H500IR1
• Specification: Light guide single semi-lock set
• Size (mm): Unity diameter f6mm, length 500
• Operates by either AC or DC power supply.
• Light control can be performed manually or by analog signal/pulse width modulation.

• Model number: PFS6H500IR2
• Specification: Light guide double semi-lock set
• Size (mm): Unity diameter f6mm, length 500
• Operates by either AC or DC power supply.
• Light control can be performed manually or by analog signal/pulse width modulation.

• Model number: NHA-3030
• Highest temperature (?): 350
• Plate size (mm): 300 x 300
• Plate material: Aluminum
• Control system: PID control
• Temperature distribution width: 6? (at 300?)
• Main unit size: 350 x 350 x 135mm
• Heater capacity: 1400W
• Power supply: 100VAC 50/60Hz 15A (2P plug)
• Withstand load: 10kg
• Weight: Approx 7kg
• Compared with general hot plate, max. temperature 350? and gives room for margin.
• With compact body, there is flexibility in handling.

• Model number: TXN800W
• Specification: 130 x 160 x 84mm
• Power supply: 100VAC 50/60Hz
• Connection capacity: AC100V MAX 15A (including output for alert)
• Temperature control system: PID control (with auto-tuning)
• Output control system: Voltage output by SSR
• Safety mechanism Double component of SSR and relay, 15A fuse
• Power cord: About 1.8m (3P plug)
• Weight: Approx 1.5kg
• Temperature display precision: +/-2? or instruction value +/- (0.3% + 1 digit), whichever is larger
• Sensor type: K class thermocouple
• Setting temperature: -100 to +1000?
• Setting system: UP/DOWN key
• Timer type: Autostart, auto-stop, SV start
• Timer setting available time: 1 - 99 hours 59 minutes
• Connection terminal: Control output/3P outlet, Alarm Output, sensor input /M3.5Y terminal block
• Accessories: Sheath type K thermocouple sensor (0 - 750?)
• *As included K class thermocouple sensor is the type of standard, Please prepare sensor capable for higher temperature separately.
• This is standard temperature controller equipped with alarm output terminal.
• 100V/1A alarm output enables various combinations including warning lamps and buzzers
• Device allows you to configure temperature control and alarm control. This turns on alarm output when configured alarm value is reached.
• This temperature controller is equipped with PID temperature control system which ensures highly accurate temperature control.
• Double component structure including SSR and relay ensures that when SSR malfunctions, relay circuit blocks continuous current flow.
• To see current output status, simply check OUT lamp.

• Model number: TXN800WAL (body)
• Specification: 130 x 160 x 84mm
• Power supply: 100VAC 50/60Hz
• Connection capacity: AC100V MAX 15A (including output for alert)
• Output for alert: 100V MAX 1A
• Temperature control system: Main control ON/OFF
• Output control system: Relay contact output
• Safety mechanism 15A fuse
• Power cord: About 1.8m (3P plug)
• Weight: Approx 1.5kg
• Temperature display precision: +/-2? or instruction value +/- (0.3% + 1 digit), whichever is larger
• Sensor type: K class thermocouple
• Setting temperature: -100 to +1000?
• Setting system: UP/DOWN key
• Connection terminal: Control output/3P outlet, Alarm Output, sensor input /M3.5Y terminal block
• Accessories: K class thermocouple round terminal specification (capable for 180?), Cable length: Approx 2m
• *Demonstration equipment is available.
• *Included K class thermocouple sensor is standard type. Please prepare sensor capable for higher temperature separately.
•
• In addition to forcibly turning off temperature anomaly, it outputs power supply for alert.
• Alert output is 100V/1A specification, various combinations such as warning lamp and buzzer are possible.
• Separately, if use sensor with high heat resistance, possible to control up to 1000 ?.
•
• It is Y terminal specification that can be connected without processing to terminal block.
• When AC100 V is input, the alarm is announced with rotary type flash.
• Buzzer included warning with buzzer according to light emission.
• By using optional mounting set, it becomes possible to fix to wall or metal part.
•
• Conversion from terminal connection to 2-terminals receptacle is possible.
•
• Conversion from terminal connection to miniature connector type is possible.

• Measurement range: -20 - 250?
• Accuracy: +/- 2? or +/- 2%
• View angle: 40? x 40?
• Minimum measurement distance: 30mm
• Waterproof dust control protection grade: IP54
• Preservation format: Image/BMP, Video/BDS/AVI (when connected to PC)/BIN (when body alone is used)
• Number of images that can be stored: 25,000 (when 8GB microSD card is used)
• Interface: USB Mini-B
• Supported OS: Windows(R)XP/7/8/10
• Power supply: AA battery x 4 (included for test)
• Size: 74 x 95 x 234mm
• Weight: Approximately 400g (including cell)
• This device shows max. temperature, min. temperature and temperature in screen center.
• By using dedicated software, possible to check temperature for each pixel.
• Device allows you to set alarm which sounds when lower or upper temperature limit is exceeded.

• External dimensions (mm): 600 x 659 x 1800
• Internal dimensions (mm): 540 x 600 x 1510
• ?* Wooden packaging (wooden frame, pallet, etc.) is used.
• Dehumidification method: H2O electrolysis discharge by solid polymer electrolysis dehumidifier (Rosal ?)
• Dehumidification capacity (at 30% RH): 12 hours or less
• ?* This is a reference from when the room is open to air with no internal load and an outdoor environment of 25 degrees Celsius and 60% RH (it varies depending on the outside air conditions).
• Humidity setting range: 10 ~ 60% RH
• Humidity control range: 25% RH to room temperature
• ?* These figures are for reference only when there is no internal load and the outdoor environment is 25 degrees C and 60% RH (they vary depending on outdoor air conditions).
• Measuring range: 0 ~ 60 degrees C/10 ~ 60% RH
• Temperature/humidity sensor: Temperature/thermistor element, humidity/resistance type sensor for low humidity measurement
• Dehumidifying element area: approximately 49 cm 2
• Humidity control system: microcomputer ON/OFF control
• Temperature and humidity display accuracy: +/- 1 degrees C (25 degrees C to 40 degrees C)/+/- 5% RH (15 ~ 40% RH at 25 degrees C)
• ?* The humidity indicator is LL when the humidity is less than 10%. If it exceeds 60% RH, the humidity indicator will be HH.
• Display resolution: 1 deg. C/1% RH
• Sampling interval: 0.5 sec
• Material: Body/Control Unit/Steel Plate, Front Window/Tempered Glass
• Shelf board dimensions: 536 x 600 mm
• Shelf mounting pitch (minimum shelf spacing): 60 mm (40 mm)
• Shelf Board Specifications: Steel Plate
• Shelf load capacity: approx. 40kg/sheet (at uniform load)
• Safety device: Individual operation malfunction error display function of solid polymer electrolytic dehumidifier (when short-circuit or disconnection), overcurrent fuse
• Power supply: AC100V 50/60Hz
• Power consumption: about 34W
• Power cord length: approx. 2 m (3P plug/body grounded)
• Caster: 100 mm in diameter, made of hard rubber (with 2 stoppers)
• Weight: 70kg
• Accessories: 4 steel shelves

• External dimensions (mm): 900 x 459 x 900
• Internal dimensions (mm): 840 x 400 x 760
• Dehumidification method: H2O electrolysis discharge by solid polymer electrolysis dehumidifier (Rosal ?)
• Dehumidification capacity (at 30% RH): 12 hours or less
• ?* This is a reference from when the room is open to air with no internal load and an outdoor environment of 25 degrees Celsius and 60% RH (it varies depending on the outside air conditions).
• Humidity setting range: 10 ~ 60% RH
• Humidity control range: 25% RH to room temperature
• ?* These figures are for reference only when there is no internal load and the outdoor environment is 25 degrees C and 60% RH (they vary depending on outdoor air conditions).
• Measuring range: 0 ~ 60 degrees C/10 ~ 60% RH
• Temperature/humidity sensor: Temperature/thermistor element, humidity/resistance type sensor for low humidity measurement
• Dehumidifying element area: approximately 49 cm 2
• Humidity control system: microcomputer ON/OFF control
• Temperature and humidity display accuracy: +/- 1 degrees C (25 degrees C to 40 degrees C)/+/- 5% RH (15 ~ 40% RH at 25 degrees C)
• ?* The humidity indicator is LL when the humidity is less than 10%. If it exceeds 60% RH, the humidity indicator will be HH.
• Display resolution: 1 deg. C/1% RH
• Sampling interval: 0.5 sec
• Material: Body/Control Unit/Steel Plate, Front Window/Tempered Glass
• Shelf board dimensions: 856 x 400 mm
• Shelf mounting pitch (minimum shelf spacing): 30 mm (10 mm)
• Shelf Board Specifications: Steel Plate
• Shelf load capacity: approx. 40kg/sheet (at uniform load)
• Safety device: Individual operation malfunction error display function of solid polymer electrolytic dehumidifier (when short-circuit or disconnection), overcurrent fuse
• Power supply: AC100V 50/60Hz
• Power consumption: about 34 W
• Power cord length: approx. 2 m (3P plug/body grounded)
• Caster: 100 mm in diameter, made of hard rubber (with 2 stoppers) * Rubber feet
• Weight: 50kg
• Accessories: 3 steel shelves

• External dimensions (mm): 1200 x 659 x 1800
• Internal dimensions (mm): 1140 x 600 x 1510
• ?* Wooden packaging (wooden frame, pallet, etc.) is used.
• Dehumidification method: H2O electrolysis discharge by solid polymer electrolysis dehumidifier (Rosal ?)
• Dehumidification capacity (at 30% RH): 18 hours or less
• ?* This is a reference from when the room is open to air with no internal load and an outdoor environment of 25 degrees Celsius and 60% RH (it varies depending on the outside air conditions).
• Humidity setting range: 10 ~ 60% RH
• Humidity control range: 25% RH to room temperature
• ?* These figures are for reference only when there is no internal load and the outdoor environment is 25 degrees C and 60% RH (they vary depending on outdoor air conditions).
• Measuring range: 0 ~ 60 degrees C/10 ~ 60% RH
• Temperature/humidity sensor: Temperature/thermistor element, humidity/resistance type sensor for low humidity measurement
• Dehumidifying element area: approximately 98 cm 2
• Humidity control system: microcomputer ON/OFF control
• Temperature and humidity display accuracy: +/- 1 degrees C (25 degrees C to 40 degrees C)/+/- 5% RH (15 ~ 40% RH at 25 degrees C)
• ?* The humidity indicator is LL when the humidity is less than 10%. If it exceeds 60% RH, the humidity indicator will be HH.
• Display resolution: 1 deg. C/1% RH
• Sampling interval: 0.5 sec
• Material: Body/Control Unit/Steel Plate, Front Window/Tempered Glass
• Shelf board dimensions: 1136 x 600 mm
• Shelf mounting pitch (minimum shelf spacing): 60 mm (40 mm)
• Shelf Board Specifications: Steel Plate
• Shelf load capacity: approx. 40kg/sheet (at uniform load)
• Safety device: Individual operation malfunction error display function of solid polymer electrolytic dehumidifier (when short-circuit or disconnection), overcurrent fuse
• Power supply: AC100V 50/60Hz
• Power consumption: about 63 W
• Power cord length: approx. 2 m (3P plug/body grounded)
• Caster: 100 mm in diameter, made of hard rubber (with 2 stoppers)
• Weight: 115kg
• Accessories: 4 steel shelves