Control Software

• Outer dimensions (mm): 700 x 617 x 810
• Capacity (L): about 150
• Convection type: Natural convection air jacket
• Temperature control range: R.T. + 5 to 80 ?C
• 37 ?C arrival time: 60 minutes
• Temperature distribution accuracy (JTM K05): ?0.5 ?C (at 37 ?C)
• Temperature fluctuation (JIS): ?0.5 ?C (at 37 ?C)
• Temperature gradient (JIS): 1.5 ?C (at 37 ?C)
• Temperature control system: 3 stages PID control, SSR output
• Communication function: standards : Bluetooth Smart (Bluetooth 4.2)/Distance: Class2 (Approximately 10 m)
• Logger function
• *Recording method: full stop (Stop recording in full memory)
• *Recording period: 2 seconds/10 seconds/30 seconds/60 seconds/10 minutes/60 minutes
• *Display period: 2 sec/10 sec/30 sec/sec/60 sec/300 sec
• external application
• *Functions: Start/Stop Recording, Read/Erase Recorded Data, Transfer to PC/List Display, Trend Graph Display (Scalable)
• *recording format: CSV format
• *Compatible OS: iOS 11.4 and later
• *compatible models: iPhone 5s, 5c, 6, 6 Plus, 6s Plus, SE, 7, 7 Plus, 8, 8 Plus, X
• Additional function: timer (ON/OFF timer, SV start/ON/OFF timer)/temperature gradient program of up to 16 steps x 8 patterns/day/time specification timer
• Safety device: Overcurrent breaker, digital setup, independent overrise prevention function, burnout mechanism (Heater OFF when sensor is disconnected)
• Heater capacity: 320W
• Temperature sensor: Pt 100 ? x 2 pieces (1 piece for temperature control and overheating prevention)
• pitch TANA/number of step: 35 mm/11 Dan
• Air outlet: f32mm x 1 piece
• Exterior/Interior: Steel melamine baking coating/Stainless steel (SUS304)
• Weight: about 40kg
• Power supply: AC100V 50/60Hz Cord length 2.3 m (3P plug)
• Rating: 3.4 A
• Accessories: shelf board Rail/shelf board x 2 sets

• Outer dimensions (mm): 550 x 567 x 1315
• Capacity (L): about 180
• Convection type: Natural convection air jacket
• Temperature control range: R.T. + 5 to 60 ?C
• 37 ?C arrival time: 60 minutes
• Temperature distribution accuracy (JTM K05): ?0.9 ?C (at 37 ?C)
• Temperature fluctuation (JIS): ?0.5 ?C (at 37 ?C)
• Temperature gradient (JIS): 3.5 ?C (at 37 ?C)
• Temperature control system: 3 stages PID control, SSR output
• Communication function: standards : Bluetooth Smart (Bluetooth 4.2)/Distance: Class2 (Approximately 10 m)
• Logger function
• *Recording method: full stop (Stop recording in full memory)
• *Recording period: 2 seconds/10 seconds/30 seconds/60 seconds/10 minutes/60 minutes
• *Display period: 2 sec/10 sec/30 sec/sec/60 sec/300 sec
• external application
• *Functions: Start/Stop Recording, Read/Erase Recorded Data, Transfer to PC/List Display, Trend Graph Display (Scalable)
• *recording format: CSV format
• *Compatible OS: iOS 11.4 and later
• *compatible models: iPhone 5s, 5c, 6, 6 Plus, 6s Plus, SE, 7, 7 Plus, 8, 8 Plus, X
• Additional function: timer (ON/OFF timer, SV start/ON/OFF timer)/temperature gradient program of up to 16 steps x 8 patterns/day/time specification timer
• Safety device: Overcurrent breaker, digital setup, independent overrise prevention function, burnout mechanism (Heater OFF when sensor is disconnected)
• Heater capacity: 640W
• Temperature sensor: Pt 100 ? x 2 pieces (1 piece for temperature control and overheating prevention)
• pitch TANA/number of step: 35 mm/20 Dan
• Air outlet: f32mm x 1 piece
• Exterior/Interior: Steel melamine baking coating/Stainless steel (SUS304)
• Weight: about 40kg
• Power supply: AC100V 50/60Hz Cord length 2.3 m (3P plug)
• Rating: 6.6 A
• Accessories: shelf board Rail/shelf board x 4 sets

• Model number: MMF-2W (with window)
• External dimensions: 320 x 286 x 428mm
• Inner furnace dimension (mm): 170 x 170 x 150 *Including sensor protrusions
• Temperature settings range: 100 - 900? (regular use: 800?)
• Sensor: K class thermocouple
• Control system: PID control
• Program function: 16 steps, 4 patterns
• Temperature settings unit: 1?
• Time settings unit: 1 minute
• Exterior: Steel coating finish
• Interior: Ceramic fiber
• Heater (4 side heater): 1000W
• Observation window: Dimensions/30 x 35mm, Material/quartz glass
• Power supply: 100VAC 50/60Hz
• Power cord length: 2m (3P plug)
• Weight: 15kg
• Accessories: Ceramic board, tweezers (240mm)
• Even 4-patterns can set up program of 16-steps.
• Possible to use it to heat treatment, caloric test, etc., because it has PID control which high temperature control accuracy.
• At the time of abnormalities in temperature, burnout function which builds in safety circuit which intercepts heater and detects abnormalities in sensor is also equipped.
• Although it is lightweight and compact, inside of furnace is designed widely.
• Setup of temperature gradient is possible.
• Time for temperature rise is shortened by adoption of 4-sides-heater.
• W-series can observe state of sample with window for observation in furnace.

• Plate material: Stainless steel (SUS304)
• Heater capacity: 80W x 2
• Temperature control system: PID control
• Temperature distribution width: 0.5 (at 37?) to +/- 1.4? (at 60?)
• Power supply: 100VAC 50/60Hz 2A
• Power cord length: 1.8m (3P plug)
• Withstand load: Approx 5kg
• Size: 450 x 300 x 75mm
• Weight: 3.9kg
• Highest temperature (?): 80
• Plate size (mm): 450 x 300
• Model number: HP-4530N
• With a wide stage, it can be used for multiple purposes.
• Light weight, easy to carry, and low profile stable design.

• Model number: MIC-199
• Lighting part size (inner diameter x outer diameter): f60.5 x f93.5mm
• Light quantity control: 0 - 100%
• Rated input voltage: AC100 - 240V 50/60Hz
• Output voltage: DC12.8V (MAX)
• Output current: 280mA
• Maximum illuminance: 25000lux
• Control unit size: 60 x 33 x 108mm (excluding projections)
• LED light source has long life (20,000 hours).
• Color temperature unchanged even while the light is adjusted.

• Model number: DIL-300N [Main unit]
• ?Dilution magnification setting range: 1.1 - 100 times
• ?Motor: Stepping motor
• ?Dispensing flow rate: Maximum flow rate approximately 1000mL/min, Average flow rate approximately 600mL/min (Example: When total amount is 100g)
• ?Dispensing amount: 5 - 300g
• ?Dispensing accuracy: Target weight within ?0.5g
• ?Used tube: Silicone tube (inner diameter f7mm x outer diameter f10mm)
• ?Weight: Approx 3.5kg
• ?Power supply: AC100 - 240V 50/60Hz
• ?Size: 130 x 160 x 125mm [Electronic balance]
• ?Weighing: 1500g
• ?Resolution: 0.1, 0.5, 0.5g (automatic switching)
• ?Power supply: AC100V 50/60Hz
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• Weigh sample and it will be automatically diluted according to set dilution factor.
• High-precision dilution control due to automatic pump control using real-time communication with electronic balance.
• Using foot switch(sold separately)frees both hands, making it convenient if you have large amount of samples.

• Highest temperature (?): 300
• Plate size (mm): 400 x 300
• Body material: Body/Stainless steel (SUS304), Control unit/stainless steel (SUS430)
• Plate material: Aluminum + ceramic coating
• Size/( ) includes protrusion: Body/440 x 340 (380) x 120.5mm, Control unit/110 x 150 (171) x 102mm
• Heater capacity: Sheathed heater 1400W
• Temperature controller: PID control
• Temperature control timer: 0 - 99 hours 59 minutes (with equipment stop function)
• Safety device: Overcurrent protection
• Power supply: 100VAC 50/60Hz
• Power cord: 2.5m, 3P plug with an earth
• Weight: 11.8kg (control unit included)
• Withstand load: 10kg
• Chemical top board
• Model number: HPRW-4030
• Body has drip-proof structure enduring any boiled over water(drip-proof structure:IPX3).
• Because body and controller are separated, body placed in draft can be controlled remotely. The distance between body and control box is approx.3*m* (unseparable).

• Model number: 100mL cooling unit
• Size: 108 x 108 x 90mm
• Inner diameter: f55mm
• Material: Aluminum
• Accurate temperature control is realized by sensing the block temperature and liquid temperature.
• The electronic cooling method adopting Peltier elements assures silent and clean operation.
• Precise temperature control is enabled for both heating and cooling.

• Model number: 300mL cooling unit
• Size: 108 x 108 x 90mm
• Inner diameter: f80mm
• Material: Aluminum
• Accurate temperature control is realized by sensing the block temperature and liquid temperature.
• The electronic cooling method adopting Peltier elements assures silent and clean operation.
• Precise temperature control is enabled for both heating and cooling.

• Model number: 500mL cooling unit
• Size: 108 x 108 x 90mm
• Inner diameter: f90mm
• Material: Aluminum
• Accurate temperature control is realized by sensing the block temperature and liquid temperature.
• The electronic cooling method adopting Peltier elements assures silent and clean operation.
• Precise temperature control is enabled for both heating and cooling.

• Model number: GEC-7050
• Highest temperature: 300 ?
• Plate size: 700 x 500mm
• Plate material: Aluminum
• Temperature sensor: K class thermocouple
• Heater capacity: 2.6kW
• Main unit size: 810 x 550 x 173mm
• Withstand load: Approximately 50kg (however, distributed load to 50% of plate area)
• Weight: Approx 45kg
• Power supply: 200V?10% 50/60Hz
• Outlet shape: Single phase 200V with an earth
• Control Panel : English
• This extremely large and rigid hot plate offers a load capacity of 50*kg* on the top panel.
• 3patterns of timer setting are available.
• Set and current temperature are displayed in 2lines for easy viewing.

• Model number: RX-350TH
• Measurement range (temperature/humidity): -20 - 70?/5 - 90%RH
• Resolution (temperature/humidity): 0.01?/0.03%RH
• Measurement accuracy (25?): ?0.8?, ?4%RH (at 20 - 80%RH)
• Resolution: 0.01?/0.03%RH
• Maximum recording capacity: 15000 points (temperature and humidity)
• Measurement interval: 2 - 59 seconds, 1 - 240 minutes
• Battery: CR1220 button cell (included for test)
• Size: 100.7 x 21.0 x 10.4mm
• Weight: Approximately 20g (excluding Cell)
• Supported OS: Windows(R) XP (SP2 or later)/VistaTM (32 bit only)/7 (32 bit only)
• *Control software (Japanese) can be downloaded from the website without pay. URL http: //www.omc-ltd.co.jp/download/asone/dl_top.html
• Small and lightweight, measure in narrow gap is available.
• Directly link to USB of PC, not required data capturing device such as communication port.
• Possible to know temperature and humidity on the spot by its display.
• When exceeds max./min. limit of setting value, informed by LED(temperature only).
• Possible to used as PC temperature and humidity recorder, because power supply will be done from USB at connecting to PC, data is transfered to PC directly.

• Model number: RX-450K
• Measurement range: -200 - 999.9?
• Resolution: 0.2?
• Temperature sensor: K type thermocouple (optional: Omega mini plug SMP-K-M type)
• Measurement accuracy (25?): ?0.8? (not including thermocouple error)
• Resolution: 0.2?
• Maximum recording capacity: 15000 points
• Measurement interval: 5 - 59 seconds, 1 - 240 minutes
• Battery: CR1220 button cell (included for test)
• Battery life: Approximately 1 year (when measuring every 1 hour)
• Size: 95.0 x 21.0 x 10.4mm
• Weight: Approximately 21g (excluding cell and thermocouple)
• Supported OS: Windows(R) 2000 (SP4 only)/XP (SP2 or later)/VistaTM (32 bit only)/7 (32 bit only)
• *Control software (Japanese) can be downloaded from the website without pay. URL http: //www.omc-ltd.co.jp/download/asone/dl_top.html
• Inserting K thermocouple(sold separately), record of 15000 data is possible.
• Data is saved in CSV format, and easy to make graph by Excel.
• Supplied power from USB when connected to PC, and it can capture data directly to PC.

• Model number: CHPS-170DF
• Highest temperature (?): 550
• Plate size (mm): 170 x 170
• Rotation speed: 100 - 1200rpm
• Motor: DC brush motor
• Temperature control system: PID control
• Sensor: K class thermocouple
• Temperature, rotation speed control: Digital setting (10?/10rpm unit)
• Material: Plate/ceramic, Body/aluminum die cast heat-resistant coating
• Heater capacity: 900W
• Safety device: Over current fuse, high temperature warning display function
• Power supply: 100VAC 50/60Hz
• Power cord length: Approx 1.5m
• Main unit size: 194 x 292 x 104mm
• Weight: Approx 3kg
• *Stirrer bar is not included in the package.
• *Demonstration equipment is available.
• Features high heat/chemical resistance with ceramic glass plate.
• Possible to used at up to 550? for high temperature heating application.
• Plate temperature control is improved with PID temperature control by new algorithm.
• High temperature alert display is equipped to prevent you from touching it at high temperature accidentally.
• Slow start rotation function prevents liquid from scattering.

• Measurement range (?) : 60 ~ + 760 , 64 ~ + 1400 (When using K class thermocouple)
• Resolution (?): 83.2 - + 999.9 ?/0.1, Others/1
• Accuracy: ?2% or ?2 ? larger (0 ? to 760 ?), ?(2 ? + 0.05/?), ?1% or ?1 ? larger (-60 to 0 ?) (When using K class thermocouple)
• Reproducibility: ?(1 ? + 0.025/?) (-60 to 0 ?), ?1%, or larger ?1 ? (0 ? to 760 ?)
• Radiation rate: 0.1 to 1 (0.1 steps)
• Distance factor (D: S): 30: 1
• Response time: 1 second
• Features: maximum/minimum display, average display, hold, laser marker, backlight, K class thermocouple measurement (Sensor sold separately)
• Drip-proof Waterproof: IP54
• Accessories: USB cable with software
• Power supply : battery AAA size

• Control system: PID program control (without auto-tuning function)
• Type R thermocouple for control x 4 pieces (temperature conditioning x 3 pieces, Excessive temperature rise prevention x 1 piece)
• Highest temperature: Regular use/1200?, Setting/1250?
• Function: Program setting (16 steps, 6 patterns), Timer:
• Heater: 88V800W x 3 circuits
• Power supply: Single-phase 200V 50/60Hz 7.2kW 36A (3 phase 200V 4.6kW 23A can also be manufactured. )
• Power cord length: Approximately 3m (with round tip terminal)
• Safety device: Independent excessive temperature rise prevention (Set temperature digital input), Door switch, Overcurrent breaker, Self-diagnosis function (Main relay is OFF when sensor is disconnected or heater is disconnected)
• Material: Exterior/steel heat-resistant coating, Heater bobbin/ceramic, Knob/wooden,
• Tubular furnace diameter: f50mm
• Outer dimension (mm): 595 x 340 x 570
• Inner furnace dimension (mm): f50 x 700
• *Furnace core tube is not included in the package.
• Model number: 3ZTF-50
• This furnace divides its tube furnace into three zones each of which is controlled independently.
• It can maintain a uniform temperature zone for a longer time than a single zone control furnace.
• It allows heating in an inert environment if an optional gas replacement unit(1-7555-44?45) is used.

• Outer dimensions (mm): 595 x 340 x 570
• Inner dimensions (mm): 50 x 700
• Inner capacity (L): 1.2
• Control method: PID program control (No autotuning)
• Control R class thermocouple x 4 pieces (Temperature control x 3 pieces, overheating prevention x 1 piece)
• Maximum temperature: Normal/1200 ?C, set/1250 ?C
• Function: Program setting (16 steps and 6 patterns), timer
• Heater: 88 V 800 W x 3 circuits
• Power supply: Single-phase 200V 50/60Hz 7.2 kW 36 A
• Power cord length: about 3 m (With rounded terminal at the end)
• Safety device: Independent overheating prevention (set temperature digital input), door switch, overcurrent breaker, self-diagnosis function (The main relay is turned off when the sensor or heater is disconnected.)
• Material: Exterior/steel heat-resistant paint, heater bobbin/ceramic, handle/wood
• Tubular furnace diameter: f50mm
• *The core tube is not attached.

• Heater capacity: Sheathed heater 900W
• Temperature controller: PID control
• Temperature display precision: +/- 2?
• Hot plate surface temperature: Room temperature +5? - 200?
• Temperature control timer: 0 - 99 hours 59 minutes (with equipment stop function)
• Plate material: Aluminum + ceramic coating
• Plate unit: Size/402.5 x 302.5 x 120mm, Material/stainless steel (SUS304, SUS430)
• Control unit: Size/110 x 150 (169) x 102mm, () shows dimensions including protrusion, Material/stainless steel (SUS430)
• Safety device: Overcurrent protection, temperature fuse
• Power supply: 100VAC 50/60Hz
• Power cord: 2.5m 3P plug with an earth (with 2P conversion adapter)
• Weight: Body/5.7kg, Control unit/1.9kg
• Withstand load: 10kg
• Highest temperature (?): 200
• Plate size (mm): 400 x 300
• Chemical top board
• Model number: SHPR-4030
• Because plate and control unit are separated, possible to place plate alone in draft. The distance between body and control box is approx.2*m*(separatable).
• Possible to used for various applications because plate has no edge.
• With foldable legs, plate thickness can be reduced to 39*mm*, convenient dimensions for storage.
• Compact dimensions easy to set and carry.