Magnetic Stirrer & Hotplate Stirrer

• Highest temperature (?): 350
• Plate size (mm): 250 x 250
• Temperature settings range: Room temperature +10 - 350?
• Temperature settings: Digital input type
• Temperature distribution width: 4? (*temperature distribution width is indoor environment 25? (no wind, no load, using internal sensor), Reference value when setting to 200?. )
• Temperature control system: Microcomputer type PID control system, ON/OFF control system
• Temperature display system: LCD digital display (setting/measurement temperature simultaneous display, heater output bar graph display)
• Internal temperature sensor: K class thermocouple
• Safety device: Self-diagnosis function (Upper or lower limit temperature abnormality detection, heater abnormality detection, sensor abnormality detection), abnormal heating preventive device (thermostat), overcurrent fuse
• Heater capacity: 1000W
• Additional function: Timer function: Setting range/1 minute - 99 hours 59 minutes (1 minute unit), Program function: Number of steps/maximum 8 steps, repeat times/maximum 9999 times, Setting resolution/temperature 0.1?, time 1 minute, Communication function: PC output (RS232C/D-sub9pin 2m), External temperature sensor supported, Upper or lower limit temperature alarm, Alarm signal output, Settings value memory function, Key lock function, Auto-tuning function
• Plate material: Aluminum (ceramic coating)
• Size: 320 x 360 x 101mm
• Power supply: 220V?10%
• Power cord length: Approx 2m
• *Demonstration equipment 1-4601-31, 32, 41, 42 are available.
• Country of origin: Japan
• Control Panel : English
• Plug: Type F(https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• Highest temperature (?): 350
• Plate size (mm): 170 x 170
• Temperature settings range: Room temperature +10 - 350?
• Temperature settings: Digital input type
• Temperature distribution width: 4? (*temperature distribution width is indoor environment 25? (no wind, no load, using internal sensor), Reference value when setting to 200?. )
• Temperature control system: Microcomputer type PID control system, ON/OFF control system
• Temperature display system: LCD digital display (setting/measurement temperature simultaneous display, heater output bar graph display)
• Internal temperature sensor: K class thermocouple
• Safety device: Self-diagnosis function (Upper or lower limit temperature abnormality detection, heater abnormality detection, sensor abnormality detection), abnormal heating preventive device (thermostat), overcurrent fuse
• Heater capacity: 680W
• Additional function: Timer function: Setting range/1 minute - 99 hours 59 minutes (1 minute unit), Program function: Number of steps/maximum 8 steps, repeat times/maximum 9999 times, Setting resolution/temperature 0.1?, time 1 minute, Communication function: PC output (RS232C/D-sub9pin 2m), External temperature sensor supported, Upper or lower limit temperature alarm, Alarm signal output, Settings value memory function, Key lock function, Auto-tuning function
• Plate material: Aluminum (ceramic coating)
• Size: 240 x 280 x 101mm
• Power supply: 220V?10%
• Power cord length: Approx 2m
• *Demonstration equipment 1-4601-31, 32, 41, 42 are available.
• Country of origin: Japan
• Control Panel : English
• Plug: Type F(https://en.wikipedia.org/wiki/Mains_electricity_by_country)

• Model number: DC-CHRM25
• Rotation speed: 250 - 2500rpm (with tachometer)
• Torque: 0.20N?m (2kg, cm)
• Motor output: 60W (DC motor)
• Rotation Control: Thyristor control method
• Power supply: 100VAC 50/60Hz
• Size: 165 x 120 x 215mm
• Weight: 3.8kg
• Accessories: Clamp holder x 1 piece, Marine type stirring blade f50mm x 1 piece, Chuck handle x 1 piece, f8 x 500mm shaft x 1 piece
• *Stand is not included in the package.
• It is stirrer of low-cost type obtained high-speed and stable rotation.
• Stirring shaft is universal chuck that can be easily attached and detached.
• It is with rotating meter(DC-CHRM25).
• Since it has built-in thermal protector, and automatically stops for overload and overheating.

• Model number: SCP-85
• Temperature settings range: 5 - 105?
• Type: Plate mold
• Temperature control accuracy: +/- 0.2?
• Plate material: Aluminum
• Cold part: Peltier module
• Temperature control system: Digital PID control
• Size for the stirrer mounting section: 126 x 167 x 20mm
• Allowable beaker capacity: 300mL
• Power supply: 100VAC 50/60Hz 1A
• Power cord length: 1.5m (3P plug)
• Weight: Approx 1.0kg
• Size: 126 x 243 x 64mm
• Plate size: 85 x 85mm
• For both cooling and heating
• Please use a stirrer to combine with no projections on the back and its height must be 60mm or more.
• It can be used for simple cooling and heating sample with a thin design.
• Control temperature with high accuracy by adoption of peltier module.
• In combination with your stirrer, cooling-stirring and heating-stirring are possible.

• Model number: SCP-125
• Temperature settings range: 5 - 105?
• Type: Plate mold
• Temperature control accuracy: +/- 0.2?
• Plate material: Aluminum
• Cold part: Peltier module
• Temperature control system: Digital PID control
• Size for the stirrer mounting section: 160 x 196 x 20mm
• Allowable beaker capacity: 1000mL
• Power supply: 100VAC 50/60Hz 1A
• Power cord length: 1.5m (3P plug)
• Weight: Approx 1.85kg
• Size: 160 x 282 x 64mm
• Plate size: 120 x 120mm
• For both cooling and heating
• Please use a stirrer to combine with no projections on the back and its height must be 60mm or more.
• It can be used for simple cooling and heating sample with a thin design.
• Control temperature with high accuracy by adoption of peltier module.
• In combination with your stirrer, cooling-stirring and heating-stirring are possible.

• Model number: Support clamp
• For external temperature sensor

• Cross clamp (for S type)

• 3 output same speed
• Rotational speed: 70 - 1000rpm
• Output voltage: DC voltage (0 - 4V)
• Output terminal: Same output jack 4 pcs
• Rotation control system: IC circuit constant voltage variable control
• Size: 90 x 180 x 60mm
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.0m (with 3P plug, conversion adapter)
• Model number: M-1
• Product name: Controller body
• Accessories: Stand adapter x 1 set, aluminum plate x 1 pc
• *Stirrer body is not included in the package. *Stirrer bar is not included in the package.
•
• 4 stirrers MS-101A can be operated cooperatively at the same speed.
•
• 4 stirrers MS-101A can be operated at different rotation speeds separately(where 2 operate cooperatively at the same speed).
• IOutput voltage of each stirrer can be controlled separately to make stirring with different conditions appropriate to each.
•
• With high chemical resistance, possible to used also in water bath(at 0~60? of water temperature).
• By using adapter, possible to used being mounted to stand.

• 3 output single speed
• Rotational speed: 70 - 1000rpm
• Output voltage: DC voltage (0 - 4V)
• Output terminal: Same output jack 4 pcs
• Rotation control system: IC circuit constant voltage variable control (three-way)
• Size: 90 x 180 x 60mm
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.0m (with 3P plug, conversion adapter)
• Model number: M-3
• Product name: Controller body
• Accessories: Stand adapter x 1 set, aluminum plate x 1 pc
• *Stirrer body is not included in the package. *Stirrer bar is not included in the package.
•
• 4 stirrers MS-101A can be operated cooperatively at the same speed.
•
• 4 stirrers MS-101A can be operated at different rotation speeds separately(where 2 operate cooperatively at the same speed).
• IOutput voltage of each stirrer can be controlled separately to make stirring with different conditions appropriate to each.
•
• With high chemical resistance, possible to used also in water bath(at 0~60? of water temperature).
• By using adapter, possible to used being mounted to stand.

• Hot plate maximum temperature: 250?
• Plate material: Ceramic coating
• Motor: Shaded Pole motor
• Size: 184 x 188 x 108mm
• Plate size: 175 x 160mm
• Heater: 250W
• Temperature adjustment system: Triac phase control method
• Power supply: 100VAC 50/60Hz 3A
• Power cord length: 1.8m (3P plug)
• Weight: 2.7kg
• Rotation control system: Electronic control
• Model number: HS-5BH
• Rotation speed (rpm): About 300 - 1500
• Stirred capacity (mL): 50 - 3000
• Accessories: Rotor (30mm) x 1 pc
• Since heater plate is light-alloy block inclusion, thermal efficiency andtemperature distribution is good.
• Top plate is excellent in chemical resistance with ceramic coating.

• Hot plate maximum temperature: 250?
• Plate material: Aluminum ceramic coating
• Motor: Kumadori motor
• Size: 608 x 434 x 122mm
• Stirring table (hot plate): f130mm230W (per 1 pc)
• Temperature adjustment system: Phase control, individual adjustable
• Power supply: AC100V 50/60Hz 1.5kW
• Power cord length: 2.8m (3P type)
• Weight: 14kg
• Model number: HS-360H
• Rotation speed (rpm): 300 - 1500
• Stirred capacity (mL): 100 - 2000 x 6
• Accessories: Rotor (30mm) x 6 pcs
• Possible to stir at normal temperature or heating each sample.
• Heater adjustment function and rotary controller is built in individually.
• Excellent in chemical resistance by plate with ceramic coating.

• Material: Plate/stainless steel (SUS304), Body/bonderizing plate
• Motor: DC motor
• Power supply: AC100V 50/60Hz 3W
• Power cord length: 1.8m (3P plug)
• Size: 187 x 175 x 57mm
• Weight: 1.2kg
• Magnet strength: 0.15T
• Model number: HS-3B
• Rotation speed (rpm): 100 - 1500
• Stirred capacity (mL): 50 - 3000
• Accessories: Rotor (30mm) x 1 pc
• Excel in the stability of high velocity revolution from low speed.

• Plate material: Stainless steel (SUS304)
• Motor: DC brush motor
• Power supply: 100VAC 50/60Hz 1A
• Power cord length: 1.8m (3P type)
• Size: 470 x 330 x 57mm
• Weight: 5.2kg
• Accessories: Rotor (30mm) x 6 pcs
• Model number: HS-360
• Rotation speed (rpm): 100 - 1500
• Stirred capacity (mL): 50 - 2000 x 6
• The powerful rare earth magnet is used.
• Since all six pieces are independent rotations, a variety and a lot of churning can be performed simultaneously.
• The smooth rotation by electronic control does not have rotation unevenness by a constant voltage formula.

• Material: Plate/stainless steel (SUS304), Body/bonderizing plate
• Motor: DC motor
• Battery life: 250 - 300 hours (depending on rotation speed)
• Size: 83 x 245 x 89mm (depth including clamp for fixing pole)
• Weight: 1.1kg
• Model number: HS-4DC
• Rotation speed (rpm): 250 - 1000
• Stirred capacity (mL): 300 - 500
• Accessories: AC adapter (100V) C size battery x 4 pieces, Rotor (25mm) x 1 pc
• It is battery type which can be used in place which does not have power supply.
• Clamp for f13*mm* main pillars is attached to the back.

• Temperature distribution accuracy: +/- 0.5? or less (at 100?)
• Temperature control system: PID control
• Timer time range: 0 - 999 seconds/0 - 999 minutes
• Temperature rise time (40? -> 100?): 15 minutes or less
• Power supply: 100 - 240VAC 50/60Hz (including AC adapter)
• Power consumption: 35W
• Size: 120 x 152 x 112mm
• Weight: 0.85kg
• Body
• Temperature adjustment range (?): Room temperature +5 - 100
• Front lab
• *Block doesn't come with Body.
• Model number: MyBL-10
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• Easy to set LCD allows user to check current temperature easily.
• It supports wide range of applications such as various reaction tests/preparation of samples because versatile blocks are provided.

• Model number: HHP-250D
• Highest temperature: 300 ?
• Plate size: 250 x 250mm
• Plate material: Aluminum
• Digital
• Temperature control system: PID control
• Temperature settings unit: -10?
• Heater capacity: 950W
• Material: Body/stainless steel (SUS304), steel (SPCC)
• Safety device: Over current fuse, internal temperature fuse, high temperature warning display function
• Power supply: 100VAC 50/60Hz
• Main unit size: 250 x 285 x 125mm
• Weight: 5kg
• Possible to accurate temperature control by PID control method.

• Digital
• Temperature control system: PID control
• Temperature settings range: -50 - 250?
• Heater capacity: 300W
• Material: Plate/aluminum (fluorine resin coating), Body/stainless steel (SUS304), steel (SPCC)
• Power supply: 100VAC 50/60Hz
• Plate size: 165 x 150mm
• Main unit size: 190 x 200 x 110mm
• Weight: Approx 2.5kg
• Model number: HSH-1D
• Rotation speed (rpm): 100 - 1500
• Stirred capacity (mL): 50 - 3000 x 1
• *Stirrer bar is not included in the package.
• Precise temperature control is possible by PID temperature control system.
• Safety lamp equips at the front body, it lights on until the temperature of the top decreased to below 60.
• Plate is excel in heat resistance and chemical resistance.
• HSH-4A ? 6A ? 4D ? 6D is capable of heating ?stirring multiple solution at the same time, and can be adjusted individually with the rotational speed and the temperature.
• It is possible to control the sample temperature directly by using the (optional) external temperature sensor.
• The adoption of microcomputer rotary speed feedback control, stable rotation from low speed to high speed can be obtained.
• Digital type can be set at 1??10rpm unit.

• Digital
• Temperature control system: PID control
• Temperature settings range: -50 - 250?
• Heater capacity: 180W x 4
• Material: Plate/aluminum (fluorine resin coating), Body/stainless steel (SUS304), steel (SPCC)
• Power supply: 100VAC 50/60Hz
• Plate size: 140 x 140mm
• Main unit size: 320 x 345 x 110mm
• Weight: Approx 6.5kg
• Model number: HSH-4D
• Rotation speed (rpm): 100 - 1500
• Stirred capacity (mL): 50 - 2000 x 4
• *Stirrer bar is not included in the package.
• Precise temperature control is possible by PID temperature control system.
• Safety lamp equips at the front body, it lights on until the temperature of the top decreased to below 60.
• Plate is excel in heat resistance and chemical resistance.
• HSH-4A ? 6A ? 4D ? 6D is capable of heating ?stirring multiple solution at the same time, and can be adjusted individually with the rotational speed and the temperature.
• It is possible to control the sample temperature directly by using the (optional) external temperature sensor.
• The adoption of microcomputer rotary speed feedback control, stable rotation from low speed to high speed can be obtained.
• Digital type can be set at 1??10rpm unit.

• Digital
• Temperature control system: PID control
• Temperature settings range: -50 - 250?
• Heater capacity: 180W x 6
• Material: Plate/aluminum (fluorine resin coating), Body/stainless steel (SUS304), steel (SPCC)
• Power supply: 100VAC 50/60Hz
• Plate size: 140 x 140mm
• Main unit size: 480 x 345 x 110mm
• Weight: Approx 10.5kg
• Model number: HSH-6D
• Rotation speed (rpm): 100 - 1500
• Stirred capacity (mL): 50 - 2000 x 6
• *Stirrer bar is not included in the package.
• Precise temperature control is possible by PID temperature control system.
• Safety lamp equips at the front body, it lights on until the temperature of the top decreased to below 60.
• Plate is excel in heat resistance and chemical resistance.
• HSH-4A ? 6A ? 4D ? 6D is capable of heating ?stirring multiple solution at the same time, and can be adjusted individually with the rotational speed and the temperature.
• It is possible to control the sample temperature directly by using the (optional) external temperature sensor.
• The adoption of microcomputer rotary speed feedback control, stable rotation from low speed to high speed can be obtained.
• Digital type can be set at 1??10rpm unit.

• Size: 212 x 131 x 84mm
• Rotation speed: 200 - 1000rpm
• Stirred capacity: Maximum 50mL x 10
• Conform stir bar length: 4 - 10mm
• Motor: DC motor
• Magnet: Neodymium magnet
• Top board material: Stainless steel (SUS304)
• Power supply: AC100 - 240V 50/60Hz (including AC adapter)
• Model number: HS-10
• *Conform stir bar length and stirred capacity are standard. It varies depending on stirring bar shape, container shape, etc. *Stirrer bar is not included in the package.
• Convenient for stirring small capacity samples such as vials and test tubes.
• Suitable for simultaneous and same condition treatment of multiple specimens.